Q50/Q60 VR30 Hi Flo Low Pressure Fuel Pump

SKU BTP-VR30-LPFP Categories ,

Q50/Q60 VR30 Hi Flo Low Pressure Fuel Pump

We have the low pressure fuel pump you need to support your power goals. With years of testing our own and many competitors setups. We are confident in offering the highest quality, best flowing single pump option still using the factory basket for the Q50/60 and Z VR30 powered Chassis. All of our Hi-Flo LPFP kits come with the Holley Hydramat. Holley’s patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! This fuel pump is essential for those wanting to run higher than E30 and want to drastically lower the chance of a fuel cut. The walbro pumps come assembled pinned to the OEM connector, no splicing here. Installer kits will come with the fuel pump terminated for the OEM connector, disassembly of the connector will be needed to install the pump without splicing. Additional modification of the basket will be needed to allow fitment of the filter.

For those wanting to get the absolute best single pump upgrade we offer the Hellcat 525 pump as an upgrade. This pump will require you to install a higher 20AMP fuse for the fuel pump found in the IPDM next to the battery at minimum. A relay kit is suggested for installation to provide the fuel pump with proper power.

For those wanting to add an extra layer of protection against any fuel cuts while running fuel levels below half a tank we suggest adding the PRIDE Fuel pickup kit. Paired with our Hi-Flo LPFP upgrade we have tested 700HP VR30s with 1/4 tank on E85 and experienced no fuel cuts.

Add $260 to base price due to filter cost and basket modification)

$222.59$495.23